Delta Electronics TP06 Manual do Utilizador descarregar pdf (Página 3)

Alignment and Adjustments

Samsung Electronics 1-1

1. Alignment and Adjustments

1-1 When entering the service mode;

1. Turn on the TV, and then select “DYNAMIC” on the picture adjustment mode.

2. Turn off the TV(STAND-BY).

3. Enter the service mode by pressing the remote control keys in the following sequence:

Display -> Menu -> Mute -> Power ON

Note : If necessary, re-do steps 1~3.

Initial display when the service mode is switched.

1-1-1 WHEN A RF SIGNAL IS RECEIVED

1-1-2 SERVICE MODE CONTROL KEYS

✍

PRECAUTIONS

1. When EEPROM IC (IC902) is replaced, first connect the power cord and wait for about 4~5 seconds.

2. After replacing EEPROM IC (IC902), enter the Service mode. Next, enter the standard data or the

previous EEPROM IC data before replacement. And then check and adjust any items related to

Geometric, Picture, Option.

DEFLECTION

VIDEO ADJUST 1

VIDEO ADJUST 2

VIDEO ADJUST 3

VIDEO ADJUST 4

OPTION (87h 05ch)

YC DELAY

RESET

T_CM2906_002 yy.mm.dd

MAIN MENU

UP / DOWN

RIGHT / LEFT

MENU DISPLAY

Select item by moving cursor

Decrease or increase the adjustment values

[Navigation Key]

MODEL((T_CM2P06_002)

DEFLECTION

VIDEO ADJUST 1

VIDEO ADJUST 2

VIDEO ADJUST 3

VIDEO ADJUST 4

OPTION (EF 8E 2E)

YC DELAY

RESET

T_CMDEAC_XXX yy.mm.dd

MODEL(T_CMDEAC_XXX)

1 2 3 4 5 6 7 8 ... 72 73

Comentários a estes Manuais

Sem comentários

Delta Electronics TP06 Manual do Utilizador Página 3

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Delta Electronics TP06