Delta Electronics DNS SIP Series Manual do Utilizador descarregar pdf (Página 11)

DS_DNS10SIP06_03092009

FEATURE DESCRIPTIONS (CON.

)

Sequential Start-up

Sequential start-up (Figure 26) is implemented by placing

an On/Off control circuit between Vo

PS1

and the On/Off pin

of PS2.

Simultaneous

Simultaneous tracking (Figure 27) is implemented by

using the TRACK pin. The objective is to minimize the

voltage difference between the power supply outputs

during power up and down.

The simultaneous tracking can be accomplished by

connecting Vo

PS1

to the TRACK pin of PS2. Please note

the voltage apply to TRACK pin needs to always higher

than the Vo

PS2

set point voltage.

Ratio-Metric

Ratio–metric (Figure 28) is implemented by placing the

voltage divider on the TRACK pin that comprise R1 and

R2, to create a proportional voltage with Vo

PS1

to the

Track pin of PS2.

For Ratio-Metric applications that need the outputs of

PS1 and PS2 reach the regulation set point at the same

time.

The following equation can be used to calculate the

value of R1 and R2.

The suggested value of R2 is 10kΩ.

PSO

TRACK

PS1

PS2

PS1

Vin

On/Off

The high for positive logic

The low for negative logic

PS1

Vin

On/Off

PS2

Vin

TRACK

PS1

PS2

PS1

Vin

On/Off

1 2 ... 6 7 8 9 10 11 12 13 14 15

Comentários a estes Manuais

Sem comentários

Delta Electronics DNS SIP Series Manual do Utilizador Página 11

Comentários a estes Manuais

Manuais e produtos relacionados com Unidades de alimentação Delta Electronics DNS SIP Series